cisco IOS XE 17.16.x — Example: Managing an Update Package

Device# The following is sample output from the show install package command: Device# show install package bootflash: isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Name: isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Version: 16.5.1.0.199.1484082952..Everest Platform: ISR4300 Package Type: dmp Defect ID: CSCxxxxxxx Package State: Added Supersedes List: {} Smu ID: 1 Device# The following sample NETCONF hello message verifies the new data model package version: Getting Capabilities:

(admin @ 172.16.0.1:830) PROTOCOL netconf version="1.0" encoding="UTF-8"?> xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"> urn:ietf:params:netconf:base:1.0 urn:ietf:params:netconf:base:1.1 urn:ietf:params:netconf:capability:writable-running:1.0 urn:ietf:params:netconf:capability:xpath:1.0 urn:ietf:params:netconf:capability:validate:1.0 urn:ietf:params:netconf:capability:validate:1.1 urn:ietf:params:netconf:capability:rollback-on-error:1.0 urn:ietf:params:netconf:capability:notification:1.0 urn:ietf:params:netconf:capability:interleave:1.0 http://tail-f.com/ns/netconf/actions/1.0 http://tail-f.com/ns/netconf/extensions urn:ietf:params:netconf:capability:with-defaults:1.0?basic-mode= explicit&also-supported=report-all-tagged urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults?

revision=2011-06-01&module=ietf-netconf-with-defaults http://cisco.com/ns/yang/Cisco-IOS-XE-aaa?module= Cisco-IOS-XE-aaa&revision=2017-02-07 http://cisco.com/ns/yang/Cisco-IOS-XE-native?module= Cisco-IOS-XE-native&revision=2017-01-07&features=virtual- template,punt-num,multilink,eth-evc,esmc,efp,dot1x Device# The following is sample output from the show install log command: Device# show install log [0|install_op_boot]: START Fri Feb 24 19:20:19 Universal 2017 [0|install_op_boot]: END SUCCESS Fri Feb 24 19:20:23 Universal 2017 [3|install_add]: START Sun Feb 26 05:55:31 UTC 2017 [3|install_add( FATAL)]: File path (scp) is not yet supported for this command [4|install_add]:

START Sun Feb 26 05:57:04 UTC 2017 [4|install_add]: END SUCCESS /bootflash/isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Sun Feb 26 05:57:22 UTC 2017 [5|install_activate]: START Sun Feb 26 05:58:41 UTC 2017 Device# The sample image used in the following examples are a Cisco Catalyst 3000 Series Switch image. Model-Driven Programmability Example: Managing an Update Package Programmability Configuration Guide, Cisco IOS XE 17.16.x 390