cisco IOS XE 17.16.x — Feature Information for In-Service Model Update

The following example shows how to add a model update package file: Device# install add file tftp://172.16.0.1//tftpboot/folder1/ cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.dmp.bin install_add: START Sat Jul 29 05:57:04 UTC 2017 Downloading file tftp://172.16.0.1//tftpboot/folder1/ cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.dmp.bin Finished downloading file tftp://172.16.0.1//tftpboot/folder1/ cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.SPA.smu.bin to bootflash:cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.dmp.bin SUCCESS:

install_add /bootflash/cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.dmp.bin Sat Jul 29 05:57:22 UTC 2017 Device# The following sample output from the show install summary command displays that the update package is now committed, and that it will be persistent across reloads: Device# show install summary Active Packages: bootflash:cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.dmp.bin Inactive Packages: No packages Committed Packages: bootflash:cat3k_caa-universalk9.16.06.01.CSCxxxxxxx.dmp.bin Uncommitted Packages: No packages Device# Feature Information for In-Service Model Update The following table provides release information about the feature or features described in this module.

This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn . An account on Cisco.com is not required. Model-Driven Programmability Feature Information for In-Service Model Update Programmability Configuration Guide, Cisco IOS XE 17.16.x 391