Configuring AppGigabitEthernet Interface for the ThousandEyes Enterprise Agent SUMMARY STEPS 1. enable 2. configure terminal 3. interface appgigabitethernet number 4. switchport trunk allowed vlan vlan-ID 5. switchport mode trunk 6. end DETAILED STEPS Procedure Application Hosting Configuring AppGigabitEthernet Interface for the ThousandEyes Enterprise Agent Command or Action Purpose Step 1 enable Example: Device> enable Enters privileged EXEC mode. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 interface appgigabitethernet number Example:
Device(config)# interface AppGigabitEthernet 1/0/1 Configures the AppGigabitEthernet and enters interface configuration mode. • For stackable switches, the number argument is switch-number/0/1. Step 4 switchport trunk allowed vlan vlan-ID Example: Device(config-if)# switchport trunk allowed vlan 10-12,20 Configures the list of VLANs allowed on the trunk. Step 5 switchport mode trunk Example: Device(config-if)# switchport mode trunk Sets the interface into permanent trunking mode and negotiates to convert the neighboring link into a trunk link. Step 6 end Example: Device(config-if)# end Exits interface configuration mode and returns to privileged EXEC mode.
Programmability Configuration Guide, Cisco IOS XE 17.16.x 448