Installing the ThousandEyes Enterprise Agent Before you begin You can install the ThousandEyes Enterprise Agent either from the URL given below or from the flash filesystem. SUMMARY STEPS 1. enable 2. app-hosting install appid application-name package package-path 3. app-hosting start appid application-name 4. end DETAILED STEPS Procedure The following is sample output from the show app-hosting list command: Device# show app-hosting list App id State --------------------------------------------------------- Application Hosting Installing the ThousandEyes Enterprise Agent Command or Action Purpose Step 1 enable Example: Device> enable Enters privileged EXEC mode.
Step 2 app-hosting install appid application-name package package-path Example: Device# app-hosting install 1keyes https://downloads.thousandeyes.com/ enterprise-agent/thousandeyes-enterprise-agent-3.0.cat9k.tar Or Device# app-hosting install appid 1keyes package flash:/apps/[greenfield-app-tar] Installs an application from the specified location. Step 3 app-hosting start appid application-name Example: Device# app-hosting start appid 1keyes (Optional) Starts the application. Step 4 end Example: Device# end Exits application hosting configuration mode and returns to privileged EXEC mode. Programmability Configuration Guide, Cisco IOS XE 17.16.x 449