1keyes RUNNING Configuration Examples for ThousandEyes Enterprise Agent Example: Installing ThousandEyes Enterprise Agent This example shows how to: • Enable IOx. • Configure AppHosting. • Configure the AppGigabitEthernet port. • Install the ThousandEyes Enterprise Agent. The following example shows how to enable IOx: Device> enable Device# configure terminal Device(config)# iox Device(config)# username cisco privilege 15 password 0 ciscoI Device(config)# end The following example shows how to configure AppHosting:
Device> enable Device# configure terminal Device(config)# app-hosting appid appid 1keyes Device(config-app-hosting)# app-vnic AppGigabitEthernet trunk Device(config-config-app-hosting-trunk)# vlan 10 guest-interface 2 Device(config-config-app-hosting-vlan-access-ip)# guest-ipaddress 172.19.0.24 netmask 255.255.255.0 Device(config-config-app-hosting-vlan-access-ip)# exit Device(config-config-app-hosting-trunk)# exit Device(config-app-hosting)# app-default-gateway 172.19.0.23 guest-interface 0 Device(config-app-hosting)# name-server0 10.2.2.2 Device(config-app-hosting)# app-resource docker Device(config-app-hosting-docker)# run-opts 1 "-e TEAGENT_ACCOUNT_TOKEN=[account-token]" Device(config-app-hosting-docker)# prepend-pkg-opts Device(config-app-hosting-docker)# end The following example shows how to configure the Appgigabitethernet interface:
Device> enable Device# configure terminal Device(config)# interface AppGigabitEthernet 1/0/1 Device(config-if)# switchport trunk allowed vlan 10-12,20 Device(config-if)# switchport mode trunk Device(config-if)# end The following example shows how to install the ThousandEyes Enterprise Agent. Application Hosting Configuration Examples for ThousandEyes Enterprise Agent Programmability Configuration Guide, Cisco IOS XE 17.16.x 450