cisco IOS XE 17.16.x — Sample Configuration for ThousandEyes Enterprise Agent

You can either download the BrownField application from the ThousandEyes website or install the prepackaged Greenfield application from the flash filesystem. Note Device> enable Device# Device# app-hosting install 1keyes https://downloads.thousandeyes.com/ enterprise-agent/thousandeyes-enterprise-agent-3.0.cat9k.tar OR Device# app-hosting install appid 1keyes package flash:/apps/[greenfield-app-tar] Device# app-hosting start appid 1keyes Device# end Sample Configuration for ThousandEyes Enterprise Agent The following is sample output from the show app-hosting detail command: Device# show app-hosting detail App id : 1keyes Owner : iox State : RUNNING Application Type : docker Name :

thousandeyes/enterprise-agent Version : 3.0 Description : Path : flash:thousandeyes-enterprise-agent-3.0.cat9k.tar URL Path : Activated profile name : custom Resource reservation Memory : 0 MB Disk : 1 MB CPU : 1850 units CPU-percent : 25 % VCPU : 1 Attached devices Type Name Alias --------------------------------------------- serial/shell iox_console_shell serial0 serial/aux iox_console_aux serial1 serial/syslog iox_syslog serial2 serial/trace iox_trace serial3 Network interfaces --------------------------------------- eth0: MAC address : 52:54:dd:c0:a2:ab IPv4 address : 10.0.0.110 IPv6 address : :: Network name : mgmt-bridge-v14 Docker ------ Run-time information Command : Entry-point :

/sbin/my_init Application Hosting Sample Configuration for ThousandEyes Enterprise Agent Programmability Configuration Guide, Cisco IOS XE 17.16.x 451