Topdon — PulseQ AC Mini User Manual

RFID Reader Mode When in the RFID Reader mode, you need to use the supplied charging card to start and stop the charging process. Step 1 Insert the charging plug into the vehicle inlet. Step 2 Touch the supplied card on the charger to start charging. You will hear a beep sound when charging starts. Step 3 Unplug the charging plug when charging is finished. Note: 1) During the charging process in both modes, the charging plug is locked to prevent unplugging. To stop charging prematurely, use the supplied card or stop charging at the vehicle end.

2) To toggle between the two charging modes, touch the supplied charging card on the charger for more than 5 seconds (until a beeping sound is heard). 37