6.2 Charging With a Socket Version Model The PulseQ AC Mini EV charger provides two charging modes for Socket Version models: Plug and Play, and RFID Reader modes. Plug and Play When in the Plug and Play mode, charging starts once the charging plug is connected. Step 1 Get a Type 2 male to Type 2 female cable (not included) designed for detachable connection (Case B). Insert the male end of the Type 2 cable into the charger's charging socket, then connect the female end to the vehicle's inlet. Then charging will start automatically. Step 2 Remove the female side of the cable from the vehicle inlet, then the male side from the charger when charging is finished. 38