PulseQ AC Pro User Manual EU Version (EN)

CONTENTS Section 1 - Precautions ............................................................................. 4 Section 2 - Standards Compliance ............................................................................. 7 Section 3 - Product Overview & Info ............................................................................. 9 Section 4 - What's in the Box? ............................................................................. 13 Section 5 - Installation ............................................................................. 14 Section 6 - LED Indicators .............................................................................

28 Section 7 - Fault Handling ............................................................................. 29 Section 8 - Warranty ............................................................................. 30

Стр. 2

Section 1 - Precautions 1.1 IMPORTANT SAFETY PRECAUTIONS WARNING - When using electric products, the tool's safety precautions should always be followed. Follow the instructions below closely. 1. Read all the instructions before using this product. This manual contains important instructions for the PulseQ AC Pro charger which shall be followed during the installation, operation, and maintenance of the charger. 2. Children should be supervised if they are in the vicinity of the PulseQ AC Pro while the PulseQ AC Pro is in use. Children should not use this device. 3. Do not put any of your or another person's body, clothing, or accessories into the tool's charging socket. 4.

Do not use this product if the enclosure or the charging socket is broken, cracked, or shows any other indication of damage. 5. Note the the operating temperature rating (-30°C to +50°C). 6. To reduce the risk of fire, only connect the device to a circuit provided with maximum branch circuit overcurrent protection of 40A 1-Phase / 20A 3-Phase / 40A 3-Phase in accordance with electrical code. Certified AC Surge Protection Device (SPD) should be installed upstream close to the charging station. SPDs shall comply with standard IEC/EN 61643-11, with specification Up ≤ 2.5kV. Certified Circuit Breakers should be installed upstream close to the charging station, or build in RCD.

Circuit breaker, if any, shall comply with standard with IEC 60898-1 or IEC 60947-2 or IEC 61009-1. 4 Model Breaker Current Rating PulseQ AC Pro_7K_S_EU 40A 1-Phase PulseQ AC Pro_11K_S_EU 20A 3-Phase PulseQ AC Pro_22K_S_EU 40A 3-Phase

Стр. 3

All these protection devices shall be chosen with appropriated technical specification, ie working voltage ≥ charging station working voltage, working current ≥ charging station working current, Ingress Protection (IP) ≥ IP54 or installed inside IP54 protection box for outdoor use. 1.2 SAFETY NOTES 1.2.1 Safety Signs Used The following types of signs are used in this manual and on the charger. They must be adhered to. CAUTION: Warns of electrical hazards. This sign is intended to alert the user that severe personal injury or substantial property damage can result if the device is not operated as requested. ATTENTION: Warns of a dangerous spot or dangerous situation.

This sign is intended to alert the user that minor personal injury or material damage can result if the device is not operated as requested. CAUTION: Do not touch in case of Electrostatic Discharge (ESD). Indicates possible consequences of touching electrostatically sensitive components. No access for unauthorized persons. Wear safety gloves Use protective footwear. Must wear a safety helmet. Indicates important texts, notes, or tips. 5

Стр. 4

1.2.2 Safety Precautions for Installation Safety gear (helmet, gloves & protective footwear) must be worn when installing the EV charger. Installation must be performed carefully due to the risk of electric shock. The charger must be installed vertically to allow for ventilation. Do not install on surfaces that vibrate or where the device could be at risk of impact. Install in noncombustible areas due to risk of fire. Do not drop any foreign objects, especially metal objects, inside the charger due to a risk of fire. 1.2.3 Safety Precautions for Operation It is strictly forbidden for minors or persons of restricted capacity to be near the charger while in operation. This is to avoid injury.

Forced charging is strictly forbidden when the electric vehicle or charger fails. The electric vehicles can only be charged when the engine is off and the vehicle is stationary. Do not charge in rainy and thunderous weather. Do not use the charger if the charging socket is defective, cracked, worn, or broken. 1.2.4 Safety Precautions for Maintenance Personnel must always wear protective gloves and footwear when performing maintenance work. It is recommended that charger is routinely inspected at least once a week. Do not put flammable, explosive, or combustible materials, chemicals, combustible vapors, or other dangerous goods near the charger, due to risk of fire.

Keep the charging socket clean and dry. Wipe with a clean, dry cloth if soiled. 6

Стр. 5