2.3 Charging Socket The charging socket of the PulseQ AC Pro meets IEC 62196-2, Type 2. PP CP N PE L1 L3 L2 Fig. 2-2 Schematic Diagram of Charging Socket To connect the PulseQ AC Pro charger with the vehicle inlet socket, a Type 2 male to Type 2 female cable (not included) is needed. Note: Ensure that the charging cable you use conforms to IEC 62196-2, and matches the specifications of the PulseQ AC Pro charger (32A 1-Phase / 32A 3-Phase / 16A 3-Phase). For chargers rated at 7kW / 22kW, the minimum size of each wire is 6mmІ. For chargers rated at 11kW, the minimum size of each wire is 2.5mmІ. 8