QX Hawk C-Mount Configuration Guide

QX Hawk C-Mount Industrial Imager Configuration Guide Hardware Required Note: Additional cordsets and accessories are available in the Microscan Product Pricing Catalog and the QX Hawk Industrial Imager User Manual . Pin Assignments A is a serial M12 12-pin plug. It is the same for all models of the QX Hawk. B is a serial M12 12-pin socket for serial models and an Ethernet M12 8-pin socket for Ethernet models. Important: See the QX Hawk Industrial Imager User Manual for a list of the wire colors that correspond to each pin.

Output 2 RS-422/485 RxD (–) New Master Default Power Ground Trigger TX (+) Terminated Output 1 RS-232 (Host) TxD RS-422/485 RxD (+) RS-232 RxD/ RS-232 CTS RX (–) Terminated Output 3 RX (+) Ground Trigger RS-422/485 TxD (+) Power TX (–) Terminated Input Common Output Common RS-232 (Host) RxD RS-422/485 TxD (–) Terminated A (All Models) M12 12-pin Plug B (Serial) M12 12-pin Socket B (Ethernet) M12 8-pin Socket QX-1 Interface Device (Top View) Trigger P Ground +10-28V T Connector T on the QX-1 Interface Device is the trigger connector. Connectors 1 , 2 , and 3 can be used to bus power and data as required by the application.

Trigger/New Master / Input 1 Common Trigger Connector (T) 4-pin Socket Standalone Configuration Ethernet with QX-1 Serial with QX-1 Serial with MS-Connect 210 1 1 3 5 7 3 8 2 2 6 6 9 9 1 Copyright ©2017 Microscan Systems, Inc.

P/N 83-216801 Rev C Item Description Part Number 1 QX Hawk C-Mount Industrial Imager FIS-6801-XXXXG 2 QX-1 Interface Device 98-000103-02 3 QX Cordset, Common, M12 12-pin Socket to M12 12-pin Plug, 1 m 61-000162-02 4 QX Cordset, Host, Serial, M12 12-pin Plug to DB9 Socket, 1 m 61-000152-02 5 QX Cordset, Host, Serial, M12 12-pin Socket to DB9 Socket, 1 m 61-000153-02 6 QX Power Supply, 100-240VAC, +24VDC, M12 12-pin Socket 97-000012-01 7 QX Cordset, Host, Ethernet, M12 8-pin Plug to RJ45, 1 m (Ultra-Lock or Screw-On) 61-000160-01 or -02 8 QX Cordset, M12 12-pin Plug and Socket to MS-Connect 210, RS-232 or RS-422, 2 m 61-000158-03 or -04 9 QX Photo Sensor, M12 4-pin Plug, NPN, Dark On, 2 m 99-000020-02 10 QX Cordset, Smart Series Light to QX-1, Continuous ON/OFF (not shown) 61-000207-01 Input RS-232 T Common RS-232 R Tr d RS RS P 5 Input 1 Termin

Page 1

QX Hawk C-Mount Configuration Daisy Chain Configuration Serial with QX-1 Ethernet with QX-1 1 1 1 1 1 1 3 3 3 3 7 3 3 5 2 2 6 6 9 9 Important: Do not attempt to power more than four imagers with a single power supply in a daisy chain configuration. Add a QX-1 and one power supply for every four additional imagers in the daisy chain. Multidrop Configuration Multidrop Network with MS-Connect 5100 1 1 1 6 6 3 3 3 3 3 3 9 9 9 2 2 2 QX Hawk C-Mount Lens Accessories Note: Additional accessories are available in the Microscan Product Pricing Catalog and the QX Hawk Industrial Imager User Manual . QX Hawk C-Mount Configurable Part Numbers QX Hawk part numbers follow the format FIS-6801-CLSG :

C (Comm) = 0 for RS-422, 1 for Ethernet; L (Lens) = 0 for C-Mount, 2 for 30°, 3 for 45°, 4 for 12°; 5 for 15°; S (Sensor) = 0 for SXGA CCD, 1 for WVGA CMOS; G = RoHS-Compliant. Copyright ©2017 Microscan Systems, Inc.

www.microscan.com Kit, Adapter Plate, QX Hawk 98-000143-01 Lens Extension Tube, 5mm (C-CS Mount Adapter) 98-92800471 Lens Extension Tube Set 0.5, 1, 5, 10, 20, 40mm 98-CO206 Lens, 8mm F/1.4-16, Front Thread 25.5mm P 0.5mm, 2/3" C-Mount 98-92800571 Lens, 12.5mm F/1.4-Close, Front Thread 40.5mm P 0.5mm, 1" C-Mount (Not for use with lens protection housings) 98-000257-01 Lens, 16mm F/1.4-16, Front Thread 27mm P 0.5mm, 2/3" C-Mount 98-000258-01 Lens, 25mm F/1.4-16, Front Thread 27mm P 0.5mm, 2/3" C-Mount 98-000259-01 Lens, 35mm F/2.1-22, Front Thread 25.5mm P 0.5mm, 2/3" C-Mount 98-92800575 Lens, 50mm F/2.8-22, Front Thread 25.5mm P 0.5mm, 2/3" C-Mount 98-92800576 Lens, 75mm F/3.9-32, Front Thread 25.5mm P 0.5mm, 2/3" C-Mount 98-92800577 Lens, Skylight UV Filter, 25.5mm 98-92800311 Lens, Polarizing Filter, 25.5mm, P 0.5 98-92800371 Lens, Polarizing Filter, 27mm, P 0.5 98-92800372 Lens Protection Housing, Standard Length (up to 48mm) 98-000218-01 Lens Protection Housing, Long (up to 72mm) 98-000226-01 Microscan Tools Drive 37-000010-01

Page 2