NOTICE * The button is not available on the housing Щ2. 6.3 Switch on and operation During operation, the device counts the number of incoming pulses at its counting input, compares it with setpoint, converts this quantity into a physical value, and displays the value on the indicator. Device can operate in following modes of counting: • count-up; • count-down; • command; • individual; • reversing; • quadrature. During operation the counter interprets different types of signals . On the device input first incoming pulse is considered as Start signal for counting. Counting stops when the Stop signal (next pulse) comes.
If there is an active " Reset " signal, the number of counted pulses is reset (counting continues from 0). Block prevents the transmission of the counting pulses to the device input. While this signal is active, counting is blocked. 35