Delta Electronics — 8.3.1.2 Data Exchange - Ethernet

AS Series Operation Manual 8.3.1.2 Data Exchange - Ethernet On the Data Exchange - Ethernet tab, double click a row in the data exchange table to set to open the Item dialog box as shown below. The settings are almost the same as those for Data Exchange - COM1 and Data Exchange - COM2 , except that the target slave model option in Remote Device Type contains Delta PLC and standard Modbus TCP equipment, as well as the IP address for remote slaves. For other settings, refer to the descriptions of Data Exchange - COM1 and Data Exchange - COM2. Select the Apply to all check box on the right side of The Shortest Update Cycle and Connection Timeout and then click OK .

Selecting the check box writes the settings for The Shortest Update Cycle and Connection Timeout to other data tables on the tab Data Exchange - Ethernet . You can also set the data exchange tables separately without _8 selecting the Apply to all check box. 8-48