AS Series Operation Manual 9.4.2.3 Set the IP Address (BOOTP/DHCP) Steps to set the IP address When using an EIP product with a BOOTP/DHCP IP address, users can set up the IP address through the IP Manager in the EIP Builder. Open EIP Builder Create Address MAC Set up IP Open IP M anager Y Disable BOOTP Same I assign P mode after each power-on N Reset I assign P mode after each power-on Descriptions for the IP Manager: _9 9-18 1 2 3 4 5 6 7 8 9 10 Item Definition Stop the Server Stops the BOOTP/DHCP server; the IP manager does not request an IP addresses from the BOOTP/DHCP server.
Network Settings Opens a dialog box to set up the subnet mask, gateway, primary DNS, secondary DNS, and domain name. Clear List Clears the contents of the list. New Adds a new IP/MAC address. Delete Deletes the selected item from the list.