Delta Electronics — 9.4.2 Set up the IP Address

Chapter 9 Ethernet Specification and Operation  Steps to set the IP address: 1. MAC address: find the MAC address on the EIP device. The MAC address uniquely identifies the device. 2. Open the IP Manager  In EIP Builder on the Tool menu, click IP Manager .  The IP Manager can be the BOOTP/DHCP Server, receiving IP address requests from devices. The IP Manager window is shown below. 9_ 9-19  Import Imports the IP/MAC address list; the file format is .CSV.  Export Exports the IP/MAC address list; the file format is .CSV.  Enable BOOTP Enables the BOOTP to assign an IP address for the selected item.  Enable DHCP Enables the DHCP to assign an IP address to the selected item.

 Disable BOOTP/DHCP Disables the BOOTP/DHCP on the device; the device does not request an IP addresses from the server.