AS Series Operation Manual 3. Right click in the EtherNet/IP Table (Consumed Tag) window and then click Add a Symbol . 4. In the Add Symbol dialog box, enter the required information in the table to create a consumed tag. 5. You can use tags in the data mapping. Refer to Section 9.4.4 for more information. Descriptions for the Add Symbol dialog box 1 2 3 4 5 _9 9-46 Number Name Description Identifier Create Tags for a PLC; up to 40 characters. Address Correspond to registers or bytes in a PLC; you can use a data register or M bit device. Type Supports data types such as BOOL, WORD, DWORD, INT, DINT, REAL, and ARRAY (one-dimensional array linear array, up to 512 bytes).
Initial Value Not supported Comment Description for the TAG; up to 128 characters.