Delta Electronics — 2.7.1 General Specifications

Chapter 2 Specifications and System Configuratio n 2.7 Counter Module Specifications 2.7.1 General Specifications 2_ 2-60 Item Description Number of channels 2 Input signal type Phase differential (A/B): x2, x4; CW/CCW; Pulse/Direction Max. transmission 200 kHz at 30 m Pulse Input distance Counter type Circular counter, linear encoder 31-bit (The single-turn, multi-turn, and status data length can be set.) Max. data length Coding method Binary code, gray code SSI Input Max.

transmission 250 kHz at 150 m, 500 kHz at 50 m, 625 kHz at 40 m, 1 MHz at 20 m, 1.25 MHz at 10 m distance Parity check bit None, odd parity, even parity Counter type Circular counter, absolute counter Counting range -2147483648 ~ 2147483647 (32-bit) Reset, preset, gate, capture, offset correction for absolute position Counter control Direction to count, counting overflow/underflow, linear counting beyond the lower and upper limit values, SSI feedback, SSI position exceeding the protection limit, SSI parity checking, SSI communication status, a zero point is set beyond SSI encoder resolution Counter Output state check Input point 2 (one for each channel) Function Reset, gate, capture External input Digital filtering OFF, 100 μs, 200 μs to 20 ms point (phase Z) Min.

software interrupt 10 μs (hardware response time included) response time External output Output point 4 point Output type NPN transistor (sinking) General comparison output instruction, table comparision output instruction Comparison Instruction function Interrupt Using comparision to achieve the interrupt function Measurement Measured item Input frequency and revolution function Average times 1 to 10 times