RIEVTECH STUDIO SOFTWARE MANUAL 4.6.11.1 General The option “ Move in X-Axis Direction ” refers to moving along the horizontal direction. The option “ Move in Y-Axis Direction ” refers to moving along the vertical direction.These two options can be checked together. That means moving in an oblique line direction. The angle of the oblique line can be computed based on the moving distance along the x-axis and along the y-axis. 4.6.11.1.1 Move in X-Axis Direction l Read Address For this option, you should set a word register to specify the moving distance of the moving component along the x-axis.The standard word address input method is referred to:
Detailed manual/General functions/Address editor/Standard Byte Address Input . l Screen MovingRange After check this option, you should set the upper limit and lower limit of the moving range on the screen. Ш Axis Lower Limit 277