RIEVTECH STUDIO SOFTWARE MANUAL The option “ Axis Lower Limit ” refers to the minimum value of x-axis for the moving range. It can be a constant or a variable. When it is a variable,the details are referred to: Detailed manual/General functions/Address editor/Standard Byte Address Input . Ш Axis Upper Limit The option “ Axis Upper Limit ” refers to the maximum value of x-axis for the moving range. It can be a constant or a variable. When it is a variable,the details are referred to: Detailed manual/General functions/Address editor/Standard Byte Address Input .
l Move Proportionally After check this option, the moving component will move according to the proportion that the “ Input Lower Limit ” is corresponding to the “ Axis Lower Limit ” and the “ Input Upper Limit ” is corresponding to the “ Axis Upper Limit ” . For example, the “ AxisLower Limit ” is 0, the “ Axis Upper Limit ” is 799, the “ Input Lower Limit ” is 0, and the “ Input Upper Limit ” is 7990. When the value of the specified word register is 0, the position is corresponding to the x coordinate: 0.When the value of the specified word register is 7990, it is corresponding to the x coordinate: 799.
l InverselyProportional This option can be checked when the option “ Move Proportionally ” is checked. After it is checked, the “ Input Lower Limit ” is corresponding to the “ Axis Upper Limit ” and the “ Input Upper Limit ” is corresponding to the “ Axis Lower Limit ” . The moving component will move in ainverse proportion. 4.6.11.1.2 Move inY-Axis Direction The settings of the “ Move in Y-Axis Direction ” are same to the “ Move in X-Axis Direction ” .But the moving component is along the vertical direction. 4.6.11.2 Indicator Light Display a picture or a text according to the status of the specified address. The settings of the “ Indicator Light ” property TAB are referred to:
Detailed manual/Component/Indicator Light . 4.6.11.3 Label The settings of the “ Label ” property TAB are referred to: Detailed manual/General functions/Drawing/Label . 278