RIEVTECH STUDIO SOFTWARE MANUAL l Description The “ Description ” is used as the name of the “ Data Sampling ” . It is a required the attribute. If it is null, there will be a red exclamation mark to indicate that a name is needed here.The “ Description ” can be a text which is easy to understand, such as “ Level of Tank 1 ” , “ Temperature of Main Motor ” , and so on. l Data Sampling Starting Address Aword register is needed to specify as the start address of the data sampling here. It is can be an internal address of the HMI and the register address ofthe controller which is connected to the HMI. l Control Setting Three attributes of the Control Setting are optional.
They are not be checked by default. You can check or not check them according to the actual needs. Ш Pause Control If the “ Pause Control ” is checked, you can set a bit address to control the data sampling. When this bit address is ON, the data sampling is paused. When it is OFF, the data sampling will continue. 414