RIEVTECH STUDIO SOFTWARE MANUAL Ш Clear Control If the “ Clear Control ” is checked, you can set a bit address to clear the sampling data. When this bit address is ON, all the samplingdata in the memoryis cleared. Ш Execute on Designated Window Opened After checking this attribute, you can specify a window when the window is set to open, the above "Pause control" and "clear control" to be effective. If the “ Execute on Designated Window Opened ” is checked, you can specify a window. When this window is opened, the settings of “ Pause Control ” and “ Clear Control ” are valid. l SamplingMode The Sampling mode can be "Cyclic" or "Triggered". The default is "Cyclic".
Ш Cyclic The unit of the Sampling Cycle can be "s" or "0.1 s". The default is 1 s. Ш Triggered If you select the “ Triggered ” option, the data sampling will be done according to the “ Trigger Condition ” . The Trigger Mode includes "Bit" and "Word". The “ Address ” is needed to specify according to the Trigger Mode. The “ Trigger Condition ” of Bit Trigger Mode can be "OFF → ON", "ON → OFF" or "OFF ↔ ON".For WordTrigger Condition, you can refer to: Detailed manual/General functions/Drawing/Logic Control . 415