RIEVTECH STUDIO SOFTWARE MANUAL If you check the option “ Clear Address on Switched Window ” , the value of the word register will be cleared to zero automatically after the action of “ Switch Basic Window ” is finished. After click the "OK" button, the “ PLC Control ” action will be added in the “ PLC Control ” settings page. Note: The “ Switch Basic Window ” action will be triggered only when the value of the trigger address changes. You can also use a Bit Set component to switch the base window in the Rievtech Studio software. But the switch basic window action may not be executed if you use the two switch window methods.
For example, after you input a value to the trigger address to switch the basic window, you switch another basic window by using the Bit Set component. Then you input the same value to the trigger address to switch the first basic 430