RIEVTECH STUDIO SOFTWARE MANUAL window. But it does not act because the value of the trigger address does not change. To avoid this situation, you should check the option "Clear Address on Switched Window". 4.10.2.9.2 Report Current Window No. The current window number can be recorded to a register. l Trigger Address You can select a word register to trigger the “ Report Current Window No. ” action. For example, if the “ Trigger Address ” is set LW200, the number of the current basic window will be moved to LW200 when the HMI displays a window. If the HMI device displays the Basic Window (18), then the value of LW200 is equal to 18.
4.10.2.9.3 Back Light Control You can define a trigger condition to control the state of the back light if you select the “ Back Light Control ” as the control type. 431