RIEVTECH STUDIO SOFTWARE MANUAL exclamation mark to prompt that any one macro has not been established. Click the button "Macro Code", you can open theEdit Macro window. l Trigger Address The “ Trigger Address ” can be a word or bit register. It depends on the setting of the "Trigger Condition". l Trigger Condition You can select “ Bit ” , “ Word ” or “ Condition ” for the “ Trigger Condition ” . If you select “ Bit ” or “ Word ” , the condition is determined by the register which is given in the “ Trigger Address ” . If you select “ Condition ” , the condition needs to be given by the logic control editor box. The detailed of “ Condition ” setting is referred to:
Detailed manual/ General functions/ Drawing/ Logical Control . 4.10.2.9.5 Audio Control You can control the internal buzzer of the HMI or the audio from the “ Audio Library ” by using the control type of “ Audio Control ” . This function is invalid if the audio output is not supported by the HMI device. l Buzzer 434