RIEVTECH STUDIO SOFTWARE MANUAL The “ X ” and “ Y ” in the Position property are used to set the x coordinate and the y coordinate of the start point of the current component in the window. The title of the “ X ” and “ Y ” is “ Fixed Point ” or “ Position ” . The title of "Fixed Point ” decides a fixed point as the start point of the component. The detail is referred to: Detailed manual/ General functions/ Drawing/ Rotation .The title of "Position" decides the point in the upper left corner of the component as the start point. Note: Inthis software, the coordinate system is shown as below. The origin point is in the upper left corner. The X-axis is horizontal direction.
The positive direction of the X-axis is to the right. The Y-axis is vertical direction. The positive direction of the Y axis is downward. 536