ROLAND — Back Cover

• Playing Patches cont. 4) After selecting your Group, use the eight BANK and NUMBER buttons to select Patches within that Group. The JV-1000 is a 76 key Music Workstation featuring 320 Patches, 80 Performances, 5 Rhythm Sets and an extensive sequencer supporting Roland S-MRC and Standard MIDI File format. It can be expanded using any of the SR-JV80-Series Wave Expansion Boards and/or the VE-Series Voice Expanders, as well as all SO-PCM-Series Sound Cards and PN- JV80-Series Parameter Cards. The on-board sequencer provides powerful recording and editing features, with a total memory capacity of 40,000 events. Each of the eight Tracks can utilize all 16 MIDI channels.

••• ROLAND JV-1000 TURBO FACTS ••• • Sequencing The sequencer can record data into any of the eight phrase Tracks on any MIDI channel. Tracks can be merged together and each Track can contain data on all 16 MIDI channels. There are eight song locations in internal memory and up to 108 songs can be stored on a single disk. 1) Select the Performance Preset A16 “PopOrchestra.” 2) Cursor right and left to listen to the Patches in this Performance. 3) Cursor right to the Rhythm Part. 4) Press REC and PAUSE on the Sequencer. Track 1 will begin to flash, and it will begin to record when you play the keyboard. 5) Play your drum part, then press STOP and RESET. 6) To listen to your Track, press PLAY.

• Initialize 1) Hold CAPS while powering on. 2) Press ENTER. 3) Press WRITE. • Playing the Demonstration Songs 1) Insert Demonstration Disk into disk drive. 2) Press DISK MODE. 3) Press ENTER two times. 4) Use the ALPHA-DIAL to select a song title. 5) Press ENTER. 6) Press LOAD. 7) Press DISK MODE when loading is complete. 8) Press PLAY. To record additional Tracks: 1) Cursor to you next instrument. 2) Press REC, PAUSE and TRACK 2. 3) Repeat steps 1 and 2, selecting a new Track each time. • Playing Patches The JV-1000 has four Preset Patch Groups, A, B, C, D, and one User-programmable Patch Group I, each with 64 Patches, for a total of 320 on-board Patches.

An M-256E can hold an additional 64 User Patches. The JV-1000 can also directly access Patches on any SR-JV80 Expansion Board, PN-JV80 Parameter Card or SO-PCM1 Card, providing immediate access to over 600 Patches. To select new Patches: 1) Press WAVE/PATCH in the EDIT PALETTE. 2) Use the Group, Bank and Number buttons, or Sliders, to select Patches for each Part. • Compu-Mixing Compu-Mixing turns the JV-1000’s sliders into an automated MIDI mixer, controlling the volume and pan information of your sequence Tracks. 1) Press PATCH. 2) In the PATCH GROUP buttons select USER, PRESET or W–EXP. 3) For User Patches: Select INT or CARD from the PATCH GROUP buttons. For Preset Patches:

Select A, B, C, or D from the PATCH GROUP buttons. For Expansion Board Patches,: Select A, B, C, or D from the PATCH GROUP buttons. For SO-PCM1 Card Patches: Select PCM CARD A from the PATCH GROUP buttons. 1) Record a sequence, as shown above. 2) Press LEVEL in the EDIT PALETTE. 3) Press REC and select an empty Track for recording. 4) Press PLAY to start recording, and move the sliders to mix the volume levels. 5) Press STOP and RESET. 6) Press PLAY and the sequencer will playback your volume changes. 7) You can do the same with TX PAN, to move the sounds throughout the stereo field.

TBS16 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20050 6/95 NQPSMTR® ) FD:4 *@C