••• ROLAND MS-1 TURBO FACTS ••• The Roland MS-1 Digital Sampler is a 16 bit stereo Phrase sampler incorporating R-DAC (Roland Digital Audio Coding). R-DAC provides maximum sampling time without compromising sound quality. The MS-1 has built-in flash RAM memory to store samples, even when the power is off. Memory can be expanded using flash RAM cards. The MS-1 has 8 pads available in two internal and three external banks, and RPS (Real Time Phrase Sequencer) to playback the phrases assigned to the pads. Battery power and a compact design make it perfect as a portable sampler for multiple applications. A 74 minute Audio Sampling CD is included.
• Auto Mode Sampling (cont.) 8) Press REC the screen will display мStandbyo. When you speak into the microphone the MS-1 will automatically start recording. When you are finished, press REC to stop sampling. (The amount of sampling time available will be graphically displayed.) • Turning Loop On/Off & Setting Loop Points By setting the loop point, you can alter the way a sample is played. Setting the loop to ON, the sample will play as long as you hold down the pad. Setting the loop to OFF, the sample will play only once, regardless of how long you hold down the pad. • Sampling from a CD 1) After a sample has been recorded, press the EDIT SAMPLE button.
Press the > button to set the desired loop parameter ( loop on S-E; will loop from the start point to the end point; Loop on L-E will loop from the loop point to the end point. Loop OFF will play the sample as recorded without looping.Use the “+and –” buttons to switch between parameters. 2) After the loop has been set, press the > button to get the loop start point display. 3) Press the to go between the parameter numbers for Loop Start (Loop P) and Loop end (End P). 4) Use the “+ and –” buttons to change the value. You can press the pad of the sample you are editing and hear the changes for the loop settings as you change the parameter settings.
5) You can vary between making large and small edits on the parameters by moving the cursor to the far left side of the parameter number for major edits and to the far right side for minor edits. 1) Use the bank A-D buttons to select the desired pad bank for sampling. Pressing C and D simultaneously will access pad bank E (Banks C,D and E are available on a Flash RAM card only) 2) Press REC. When the “Select Pad 1-8 display appears, press the pad you wish to assign a sample. 3) After you select the pad, the (Gain:) display will appear. Start the CD player, and the sound will be heard through the headphones or amplifier.
4) By using the +/ - buttons, set the level so that the “*” in the meter lights up occasionally. 5) Press the REC button shortly before playing the CD to begin sampling. When the sample is finished, press REC to stop sampling. • Auto Mode Sampling from a Microphone You can use the Auto mode to initiate sampling when a sound is detected on the audio inputs. 1) Plug the mic into the MIC input. 2) Use the bank A-D buttons to select the desired pad bank for sampling. ( Pressing C and D simultaneously will access pad bank E). 3) Press the REC button. When the “Select Pad 1- 8” display appears, press the pad you wish to assign a sample. 4) When the “GAIN:” meter appears, press the> button once.
The display will read LINE MONO. From this point, you can change from LINE to MIC by pressing the “+” button once. 5) Press the > button two more times and you will come to the Man/Auto settings. 6) Press the + button to set the MS-1 for L1 (Level 1) 7) Press the Use the + or -buttons to set the level so that the “*” in the meter lights up occasionally. • Truncating a Sample The Truncate function removes unwanted material from the beginning and ending of a sample. To truncate a sample: 1) First, set the loop settings using the previous instructions on мSetting the Loop Pointso for the sample. 2) Press the EDIT UTILITY button. Use the buttons to select the Truncate: display.
Press the pad you want to truncate. 3) Press the pad you wish to truncate. 4) Press the (REC) YES to execute the procedure. NOTE: You can cancel the procedure by pressing the EXIT/NO button. TBS21 © 1995 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20049 2/96 NQPSMTR® & :4C@ &2>A=6C