ROLAND — Back Cover

••• ROLAND RA-800 TURBO FACTS ••• The RA-800 is a desktop arranger module that provides realtime accompaniment, backing tracks and display of MIDI lyrics. It contains a wide variety of Music Styles, making it ideal for one-man performers and songwriters. The RA-800 features 689 Tones, 64-voice polyphony, 128 Music Styles, 192 Performance Setups and General MIDI/GS compatibility. The 8-Track Music Style Recorder lets you create your own Music Styles, and it also features direct-to-disk recording & playback of Standard MIDI Files. The RA-800 is 32 part multi-timbral with two MIDI ports, and features built-in reverb, chorus, delay and EQ.

Plus, with the Roland LVC-1 Lyrics Video Converter, the RA- 800 can output MIDI lyrics to an external video monitor. • Setting Splits and Layers cont. 5) Press F2: PARAM. 6) Press PAGE down to select page 2. 7) Use the DRUMS rotary knob to choose the split point. For a three way split, use the ACCOMP rotary knob to choose the UPPER 2 split point. • Layering Tones To layer two Tones across the whole keyboard: 1) Press KBD MODE. 2) Press F3: WHOLE RIGHT. 3) Make sure that UPPER1 is ON (in the display). 4) Press UPPER2 so that it is ON. 5) Press SYNCHRO START so it is not lit. • Initializing 1) Hold WRITE and turn the power on.

• Storing Performances in Memory You can save the current Tones, Music Styles, Split Points, and Effect Settings (including edits) into a Performance Memory. To store your setup: 1) Press WRITE. 2) Press UPPER1 (under the display). Make sure that Memory Protect is OFF. 3) Hold WRITE and press the desired GROUP A-C button in the Performance Memory area. 3a) Continue to hold WRITE and press the desired PERFORMANCE MEMORY 1-8 button to select a Bank location. Continue holding WRITE and press the desired PERFORMANCE MEMORY 1- 8 button again to select a Number location. • Playing the Demo Songs 1) Insert the Demonstration Disk into the disk drive. 2) Press the NEXT button to select a song.

3) Press PLAY/STOP. • Playing the RA-800 from a MIDI keyboard 1) Connect the MIDI OUT port of your keyboard to the MIDI IN A port of the RA-800. 2) Set the keyboard’s MIDI transmit channel to 1. 3) Play any key below middle C to activate the RA- 800 accompaniment. 4) Play any key above middle C to solo along with the accompaniment. • Playing Standard MIDI Files 1) Insert a DOS format disk into the drive. 2) Press GM/GS MODE. 3) Press PREVIOUS or NEXT to select a song. 4) Press PLAY/STOP. 5) If the SMF includes lyrics, press F4 to view the lyrics on the display. • Selecting a Music Style 1) Press GROUP A-B in the Music Style area. 2) Press Music Style 1-8 to select a Bank.

3) Press Music Style 1-8 again to select a Music Style. • Selecting Tones 1) Press UPPER 1 (under the display). 2) Press GROUP A-D, (in the TONE area) to select the desired group of instruments. 3) Press Tone 1-8 to select a Bank. 4) Press Tone 1-8 again to select a Tone from that Bank. 5) Press VARIATION to select a variation Tone. • Setting-up the RA-800 for use with the LVC-1 1) Press F3: MIDI 2) Hold SHIFT and press F1: Basic 3) Press PAGE UP/DOWN to access “TX.” 4) Use the LOWER NUMBER dial to select “Lyrics” in the Filter field. 5) Press the UPPER 2 button to set it to “ON.” 6) Hold WRITE and press MIDI SET button 1 to save this setting.

7) Everytime you power the RA-800 on, select MIDI SET 1 for use with the LVC-1. • Setting Splits and Layers The RA-800 can have up to two Tones layered on the right hand and a separate tone on the left. 1) Press KBD MODE. 2) Press F2: SPLIT. 3) Press UPPER1 (if it’s not already ON in the display) and UPPER2 for a layer; press LOWER to add a TONE to the left hand. 4) Press F5: EXIT. ••• Options ••• LVC-1 Lyrics View Converter, FC-7 MIDI Foot Controller, PK-5 Dynamic MIDI Pedal, FV-300L Expression Pedal, DP-6/2 Pedal Switch, MSD-Series Style Disks. TBS49© 1995 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 21028 10/96 NQPSMTR® % C62=E:>6 %%!%