ROLAND — Back Cover

••• ROLAND RD-500 TURBO FACTS ••• The RD-500 is a professional digital piano with 88 weighted keys, 121 high quality sounds and built-in digital effects. The RD-500 can layer and split sounds, and can transmit on two MIDI zones to control external synthesizers. It includes pianos, electric pianos, clavs, vibes, organs, synths, strings and a full drum kit. When used with a sequencer, the RD-500 is 8 part multitimbral. • Storing a Setup Each of the 32 SETUPs store all the Tone Settings (Variation, Chorus, Reverb, Tremolo, Detune, Attack, Decay, Release, Brightness, Sensitivity, and Bend Range) for each of the 12 Instrument Groups - a total of 12 custom sounds per setup.

Each Setup also stores the Layer, Split, Local, and Multitimbral information. Setup A-1 is preset and cannot be changed, the remaining 31 are user programmable. To store a Setup into memory: 1) Press FUNC and TRANSPOSE simultaneously. 2) Press A-D 1-8 for the location you want to WRITE to. 3) Press YES. • Initialize 1) Power on while holding SETUP MEMORY 1 and 8. 2) Press YES. • Playing the ROM Demo 1) Press FUNC and DEC simultaneously. 2) Use the INC / DEC to select song 1-4. • Using C1 Slider and Pedal Controls The C1 Slider, Pedal, Damper, Bender, and Modulation lever can all be set independently for the Upper and Lower parts (as well as TX Zones for MIDI output).

To make internal controller assignments: 1) Press FUNC. 2) Press CONTROL (to the right of the display) to cycle through the controllers - C1 (slider), Pdl (pedal), dnp (damper), bnd (bender), Nod (modulation). The display will jump to the currently assigned function for that controller. 3) Use INC / DEC to select the function for your selected controller. • Selecting Patches 1) Press an Instrument Group (Grand 1, Rhodes, etc.) 2) Press VARIATION. 3) Press INC and DEC to choose a Variation. • Creating a Layer 1) Press Layer. 2) Press and hold the Instrument Group you want for the UPPER Part, then press the Instrument Group you want for the LOWER Part.

3) Press VARIATION to choose sounds for the upper and lower parts. 4) Press UPPER o r LOWER (it will flash). 5) Use INC / DEC to choose a Variation for that Part. 6) To set the level for each Part, press LEVEL. Press UPPER or LOWER to select the Part (it will flash). 7) Use the slider or INC / DEC to set the level. 8) Press VARIATION again to exit the edit mode. • Setting MIDI Local Control 1) Press FUNC. 2) Press LOCAL. 3) Use INC / DEC until display reads Off, On-1 or On-2. 4) Press FUNC to exit. • Creating a Split 1) Press SPLIT. 2) Press and hold the Instrument Group button you want for the UPPER Part, then press the Instrument Group button you want for the LOWER Part.

3) Press VARIATION to choose sounds for the upper and lower parts. 4) Press UPPER o r LOWER (it will flash). 5) Use INC / DEC to choose a Variation for that Part. 6) To set the level for each Part, press LEVEL. Press UPPER or LOWER to select the Part (it will flash). 7) Use the slider or INC / DEC to set the level. 8) Press VARIATION again to exit the edit mode. • Set the Transmit Channels for the Upper and Lower Transmit Zones 1) Press FUNC. 2) Press TX CH. The TX/INT and UPPER TRANSMIT CONTROL indicators flash. 3) Press INC and DEC to set the Transmit channel for the UPPER Part. 4) Press the LOWER TRANSMIT CONTROL button. It flashes.

5) Press INC and DEC to set the Transmit channel for the LOWER Part. 6) Press FUNC to exit. 7) Press the UPPER and/or LOWER TRANSMIT CONTROLS to choose a Transmit Zone/Channel. • Set the Split Point 1) Press FUNC. 2) Press ZONE. The UPPER light will flash. 3) Press the key for the low note of the UPPER Zone. 4) Press LOWER and the key for the high note of the LOWER Zone. Note: In Local Off and On 2, the RD-500 will transmit out MIDI on the RX Channel for the internal Upper and/or Lower Part, in addition to the TX Zone settings. TBS26 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20023 12/95 NQPSMTR® % 5:8:E2=DE286A:2?@