ROLAND — Back Cover

••• ROLAND TD-5 TURBO FACTS ••• The Roland TD-5 (as found in the Trap Set) offers 210 16-bit, CD quality sampled sounds that can be arranged into 32 different drum kits, an onboard digital effects processor, an auxiliary input for a CD player or a cassette tape recorder, headphone output, and a voice metronome for practice. The incredibly responsive pads and hi-hat controller provide a very realistic feel. There are eight dual- trigger inputs to accommodate a variety of pads, trigger types, and acoustic drum triggers. • Copying a Patch To copy a patch from one location to another: 1) While in play mode, select the desired source patch by pressing the PATCH buttons. 2) Press EDIT.

3) Press the PATCH buttons to choose the destination patch. (to stop this operation, press EDIT) 4) Press the flashing START/STOP button to copy the patch. • Initializing 1) Hold down the EDIT button for a few seconds, until the LED begins to flash faster. 2) Press the instrument parameters you want to initialize: (1 to 32) for a single patch (bcK) for background instruments (SyS) for trigger, MIDI, and metronome settings (ALL) for all the TD-5K setting 3) Press the START/STOP button to start the initialization. (To stop the procedure, press EDIT instead) 4) Press EDIT again to return to play mode.

• Metronome Settings The TD-5 will allow you to change the instrument, volume, time signature, and tempo of the metronome. To change the metronome settings: 1) Press the START/STOP button to start the metronome. 2) Press the BEAT TYPE buttons to select the correct time signature. 3) Press the TEMPO buttons to decrease or increase the speed of the metronome. 4) To select a different sound for the metronome, press the INSTRUMENT buttons. 5) To adjust the volume, press the LEVEL buttons. 6) To pan the metronome, press the PAN buttons. NOTE:

You can have the metronome play only through the headphone output jack by pressing the PAN > button until you see “Pho.” • Selecting a Kit Use the Patch Increment (>) or Patch Decrement ( buttons to select one of the 32 available drum kits. • Editing the Sounds The TD-5 Percussion Sound Module has dedicated buttons on the front control panel for quick and easy editing of sounds. To assign an instrument to a pad. • Synchronizing the Metronome The metronome in the TD-5 can be set to synchronize with an external sequencer. 1) Select the patch you wish to edit. 2) Press the EDIT button. 3) Strike the pad to trigger the sound you want to edit.

4) Press the INSTRUMENT buttons to select the desired sound. (from this point, you can edit the level, pitch, panning, decay and effect for the instrument by pressing the dedicated buttons on the front panel) 5) Press EDIT again to store the instrument in memory. 1) Hold down the EDIT button until the LED begins to flash rapidly. 2) Press the LEVEL channel. 3) Press the LEVEL > button to select SYc. 4) Press the PATCH buttons to set the external sync to on or off. 5) Press EDIT again to enter the play mode. TBS65 © Roland Corporation US, 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20062 6/97 C@=2?5® ' A6C4FDD:@? D@F?5 >@5F=6