••• ROLAND TDE/B-7K TURBO FACTS ••• The Roland TD-series Compact Drum Kits are the first ever to respond to every stylistic nuance and playing technique of an acoustic drum set. Both kits feature the TD-7 Percussion Sound Module with over 500 16-bit quality sounds and digital effects. The TDE-7K includes the revolutionary FD-7 Hi Hat Control Pedal that responds just like an acoustic hi hat, the KD-7 Kick Pedal and 8 PD- 7 dual trigger pads. These kits respond to such techniques as press rolls, rim shots and cymbal chokes. • Assigning Sounds/Layering (cont.) To assign LAYER modes and sounds: 1) Select your desired patch using the DATA dial. 2) From the Patch Page, press EDIT.
3) Cursor to PATCH using the buttons and press ENTER. 4) Cursor to NOTE and press ENTER. 5) Strike the pad or rim that will trigger the sound you wish to edit. 6) Cursor to the Instrument Number and select your Instrument for SOUND 1 with the DATA dial. 7) Push CURSOR LEFT ( SOUND 2 with the DATA dial. 8) Cursor to the Instrument Number and select your Instrument for SOUND 2 with the DATA dial. 9) Press CURSOR LEFT ( LAYER with the DATA dial. 10) Press CURSOR RIGHT (>) once and select your LAYER mode with the DATA dial. There are a few procedures to follow before you play the kit for the first time. Don’t play the kit while the TD-7 is warming up!
When the unit is active, (after you see the Patch Page), the first thing you need to do is initialize the hi hat control pedal. This will set up the FD-7 Hi Hat Controller for optimum performance results and will remain set even after the power is turned off. • Initializing 1) From the Patch Page, press SYSTEM. 2) Cursor to INI using the buttons and press ENTER. 3) Select the word HI HAT using the buttons and select ALL using the DATA dial. 4) Press ENTER twice. • Editing Sounds The TD-7 will allow you to make various types of edits to the sounds themselves. These Instrument Parameters include Pitch, Decay, Pan, Nuance, Brilliance, Pitch Bend, Output Levels and Effect Send Levels.
• Initialize the Hi Hat Control Pedal 1) From the Patch Page, press SYSTEM. 2) Cursor to INI using the buttons and press ENTER twice. To change the Instrument Parameters: 1) From the Patch Page, press EDIT. 2) Cursor to INST using the buttons and press ENTER. 3) Strike the pad or rim that will trigger the sound you wish to edit. 4) Cursor to the parameter and select the desired parameter using the DATA dial. 5) Push the CURSOR RIGHT button (>) once and change the value using the DATA dial. • Assigning Sounds/Layering The Instrument Section allows you to assign an instrument to each Note Number, allowing you to assign a different sound to each pad.
You can also assign two different instruments to one Note Number, allowing you to create sounds through various mixing effects. This is called LAYER. The two instruments are called SOUND 1 and SOUND 2. NOTE: At the top of the display you'll find useful information concerning sound editing. To assign an instrument to a note number: 1) Select your desired patch using the DATA dial. 2) From the Patch Page, press EDIT. 3) Cursor to PATCH using the buttons and press ENTER. 4) Cursor to NOTE and press ENTER. 5) Strike the pad or rim that will trigger the sound you wish to edit. 6) Cursor to the Instrument Number and select your Instrument with the DATA dial. EXAMPLE:
R1>N#35>S1>i081 R1 = Pad or Rim being edited (Rim number one) N#35 = MIDI Note Number assigned to this Pad or Rim S1 = Which sound in layer (S1 is Sound #1, S2 is Sound #2) i081 = Instrument Number assigned to Note Number being used. (number 81 out of 512) TBS33 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20028 12/95 NQPSMTR® ' '@E2= #6C4FDD:@? '