ROLAND — Back Cover

• Setting a Note Number The TD-7T is equipped with 9 stereo Trigger Input jacks. Using the supplied stereo cables, each PD-7 can output both a drum head and a rim shot trigger signal. Both of these trigger signals can be assigned a separate MIDI note number. • Sequence Triggering From Pads (cont.) 6) Cursor to the parameter displayed at bottom left portion of the screen and select SEQPTN # with the DATA dial. 7) Push the CURSOR RIGHT button (>) once and select the desired sequence using the DATA dial. 1) Select a patch using the DATA dial. 2) From the Patch Page, press EDIT. 3) Cursor to PATCH using the buttons and press ENTER. 4) Cursor to TRIG and press ENTER.

5) Select a trigger number by playing the corresponding pad or rim or by cursoring to and rotating the DATA dial. 6) Push the CURSOR RIGHT button (>) twice and select NOTE # using the DATA dial. 7) Push the CURSOR RIGHT button (>) and select a note number using the DATA dial. • Sequencing Tip When using an external sequencer to record data performed on the TDE kit, refer to the following suggestions. To RECORD TD-7T data on a sequencer: 1) Attach a MIDI cable from the TD-7T MIDI OUT to the sequencer's MIDI IN. To PLAY the TD-7T from a sequencer: • Effects The TD-7T offers two separate digital effect processors which can be edited.

1) Attach a MIDI cable from the sequencer's MIDI OUT to the TD-7's MIDI IN. 2) Push the SYSTEM button and select "IF" (interface) with the CURSOR RIGHT (>) button. 3) Press ENTER. 4) Using the DATA dial, change "Standard" to "MIDI - Sound." 5) Change this back to "Standard" for normal operation. To select and edit the two effects processors: 1) Select the desired patch using the DATA dial. 2) From the Patch Page, push EDIT. 3) Cursor to PATCH using the buttons and press ENTER. 4) Cursor to FX and press ENTER. 5) Cursor to EFFECT and select EFFECT 1 or EFFECT 2 using the DATA dial. 6) Push the CURSOR RIGHT button (>) and select the desired effect using the DATA dial.

• Assigning Sounds to Individual Outputs The TD-7T offers two assignable independent outputs. To edit the effect you’ve chosen: 1) Push the CURSOR RIGHT button (>) and select the parameter to be edited using the DATA dial. 2) Push the CURSOR RIGHT button (>) once and change the parameter using the DATA dial. To assign a sound to an individual output: 1) Press the SYS button. 2) Cursor to SET and press Enter. 3) To change Send 1 to Individual Output, Cursor to Effect 1, turn the Data Dial to Indiv 1. 4) Press Exit twice. • Triggering a Sequence From a Pad The TD-7T features a Phrase Sequencer that allows the user to trigger any of the 48 sequences from any of the pad/rims.

Now, assign a sound to Individual Output 1. 1) Press the EDIT button. 2) Cursor to INST and press Enter. 3) Hit the a Pad to select the assigned sound. 4) Turn the Data Dial to find OUT LEVEL. Setting this parameter to “0” will remove the sound from the stereo outputs. 5) Turn the Data Dial to SEND 1 LEVEL. This will control the level for the sound now assigned to Individual Output 1. 6) Repeat this procedure using Indiv 2 and another instrument to assign Individual Output 2. To assign a sequence to a pad/rim: 1) Select the desired patch using the DATA dial. 2) From the Patch Page, press EDIT. 3) Cursor to PATCH using the buttons and press ENTER. 4) Cursor to TRIG and press ENTER.

5) Strike the pad or rim you wish to assign a sequence to. TBS64 © 1994 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20063 6/97 NQPSMTR® '' EFC3@ G6CD:@? #6C4FDD:@? D@F?5 >@5F=6