••• ROLAND XP-60 TURBO FACTS ••• The XP-60 Music Workstation is the newest member of the powerful XP family. Features include:
• 61-note keyboard with aftertouch • 64 note polyphonic, 16 part multitimbral • 512 Preset Patches and 128 User Patches • Up to four SR-JV80 Wave Expansion boards can be installed, providing up to 1,660 Patches • Reverb, Chorus, and a Multi Effect unit with 40 effects including Rotary Speaker, Distortion, Flanging, Phasing, and MultiTap Delays • Sound Palette section for realtime control • Arpeggiator with 33 styles • Advanced 60,000 note MRC-Pro Sequencer with 16 Tracks and 100 Patterns • Grid, Shuffle, and Groove Quantize functions • Direct from Disk song playback • Realtime Phrase Sequencer (RPS) allows recorded Patterns to be triggered from specific keys and to be dynamically controlled by velocity • Selecting & Playing Rhythm Sets 1) Press RHYTHM.
2) Select a Rhythm Set with the DIAL or DEC/INC. • Using the Sound Palette for Realtime Control 1) Select a Patch. 2) Press FILTER/ENV to control envelope parameters, or LEVEL to control Tone levels. • Using the Arpeggiator 1) Press Patch and use the VALUE DIAL to select a Patch. 2) Press ARPEGGIO. 3) Hold a chord on the keyboard. 4) Dial an Arpeggio Style. 5) Press F5: DETAIL. 6) CURSOR to MOTIF and use the VALUE DIAL to select the note order. 7) CURSOR to BEAT PATTERN and use the VALUE DIAL to select a pattern. • Loop Recording As an example we will record a four bar loop: • Initializing 1) Press UTILITY. 2) Press 8 on the key-pad followed by ENTER. 3) Press F6: EXECUTE.
4) If Memory Protect is on, dial OFF, then ENTER. 5) Press F6: EXECUTE. 1) Press PERFORM and select PR-A:12 Pop Set 1. 2) Press SEQUENCER. 3) Press REC, then select LOOP=4, MODE=MIX, QNTZ=OFF, CountIn=1, and the desired tempo. 4) Press TRK 10. 5) Press PLAY, wait for count-in, and record drums. 6) Repeat steps 4 - 6, using TRK/PART 2 for bass, and TRK/PART 1 for piano. • Playing the On-board Demo 1) Hold SEQUENCER and press CHAIN PLAY. 2) Press F5: OK. • RPS - Real-time Phrase Sequencing 1) Create a loop recording, as shown above. 2) Press F3: TRK EDIT, then F3: COPY. 3) Cursor to and select PTN 001. 4) Press F6: EXECUTE. 5) Press SEQUENCER, F1: SETUP, then F4: RPS.
6) Press the key C4 to assign the Pattern to it. 7) Cursor to PATTERN and select 001. 8) Press EXIT, RPS, then press C4 to trigger the pattern. • Playing Demos or Sequences from Disk 1) Insert a disk that contains an XP-Series sequence (.SVQ) or a Standard MIDI File (.MID). 2) Press SEQUENCER. 3) Press F6: LIST to view a list of songs on disk. 4) Use the VALUE DIAL to select a song and press PLAY. • Selecting & Playing Patches The XP-60 has 640 on-board Patches that are divided into 5 Banks. Use the following procedure to select a Patch: • Splitting the Keyboard 1) Select PERFORM PR-A:12, then press LOCAL. 2) Cursor to KEY MODE and select LAYER.* 3) Cursor to LOCAL SW.
4) Press PART buttons 1 and 2 (BANK buttons). 5) Press PERFORM, then F2: K.RANGE. 6) Dial C4:G9 for the Part 1 Key Range, and C1:B3 for the Part 2 Key Range. 1) Press PATCH. 2) Press SOUND LIST. 3) Choose a Patch Bank by pressing F2: -GROUP, or F3: +GROUP. 4) Use the VALUE DIAL to select a Patch. 5) To enter GM Mode, hold SHIFT and press PERFORM (press PERFORM again to exit). *Single Key Mode is primarily for sequencing. TBS73 ©1998 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles, CA 90040 Faxback # 20071 3/98 NQPSMTR® +# FD:4 H@C