ROLAND — Back Cover

••• ROLAND XP-80 TURBO FACTS ••• The XP-80 Music Workstation is a powerful new instrument based on a 32-bit RISC processor with 8 Mb ROM waveforms. It is 64 note polyphonic, 16 part multitimbral, GM compatible, and contains 512 Preset Patches and 128 User Patches. Up to four SR-JV80 Wave Expansion boards can be installed, providing up to 40 Mb and 1,660 Patches. The XP-80 also includes Reverbs, Chorus, and 40 other effects including Rotary, Distortion, Flanging, Phasing, and MultiTap Delays. It has a 76-note weighted keyboard, a Sound Palette section for realtime control, a sequencer Click Out for other musicians to keep time with and an Arpeggiator with 33 different styles.

It’s Advanced MRC-Pro Sequencer features a 60,000 note capacity, 16 Track linear and non-stop-loop recording, plus 100 Patterns, realtime non-destructive editing, event editing, and Direct from Disk song playback. The XP-80's enhanced Realtime Phrase Sequencer (RPS) allows recorded Patterns to be triggered from specific keys and to be dynamically controlled by velocity. • Selecting & Playing Rhythm Sets 1) Press RHYTHM. 2) Select a Rhythm Set with the DIAL or DEC/INC. • Using the Sound Palette for Realtime Control 1) Select a Patch. 2) Press FILTER/ENV to control envelope parameters, or LEVEL to control Tone levels. • Using the Arpeggiator 1) Press ARPEGGIO. 2) Hold a chord on the keyboard.

3) Dial an Arpeggio Style. 4) Press F5: DETAIL. 5) Cursor to MOTIF and dial the note order. 6) Cursor to BEAT PATTERN and dial a pattern. • Loop Recording As an example we will record a four bar loop: 1) Press PERFORM and select PR-A:12 Pop Set 1. 2) Press SEQUENCER. 3) Press REC, then select LOOP=4, MODE=MIX, QNTZ=OFF, the tempo, and count-in (M=?). 4) Press TRK 10. 5) Press PLAY, wait for count-in, and record drums. 6) Repeat steps 4 - 6, using TRK/PART 2 for bass, and TRK/PART 1 for piano. • Initializing 1) Press UTILITY. 2) Press 8 on the key-pad followed by ENTER. 3) Press F6: EXECUTE. 4) If Memory Protect is on, dial OFF, then ENTER. 5) Press F6: EXECUTE.

• RPS - Real-time Phrase Sequencing • Playing the On-board Demo 1) Create a loop recording, as shown above. 2) Press F3: TRK EDIT, then F3: COPY. 3) Cursor to and select PTN 001. 4) Press F6: EXECUTE. 5) Press SEQUENCER, F1: SETUP, then F4: RPS. 6) Press a key to assign the Pattern to. 7) Cursor to PATTERN and select 001. 8) Press EXIT, RPS, then the chosen key. 1) Hold SEQUENCER and press CHAIN PLAY. 2) Press F5: OK. • Playing Demos or Sequences from Disk 1) Insert a disk that contains an XP-Series sequence or a Standard MIDI File (SMF). 2) Press SEQUENCER. 3) Press F6: LIST to view a list of songs on disk. 4) Dial a song and press PLAY.

• Splitting the Keyboard 1) Select PERFORM PR-A:12, then press LOCAL. 2) Cursor to KEY MODE and select LAYER.* 3) Cursor to LOCAL SW. 4) Press PART buttons 1 and 2 (BANK buttons). 5) Press PERFORM, then F2: K.RANGE. 6) Dial C4:G9 for the Part 1 Key Range, and C1:B3 for the Part 2 Key Range. • Selecting & Playing Patches 1) Press PATCH. 2) Press SOUND LIST. 3) Choose a Patch Bank by pressing F2: -GROUP, or F3: +GROUP. 4) Dial a Patch Number. 5) To enter GM Mode, hold SHIFT and press PERFORM (press PERFORM again to exit). *Single Key Mode is primarily for sequencing. TBS40 ©1996 Roland Corporation U.S., 7200 Dominion Circle, Los Angeles , CA 90040 Faxback # 20034 2/96 NQPSMTR® +# FD:4 H@C