NQPSMTR Supplemental Notes FC-200 Power on while holding the #10 pedal, then press the CTL pedal. FG-10 Power on while holding CLEAR and EXIT. FG-1000 Power on while holding CLEAR and EXIT. FP-1 The unit resets each time you turn it on. FP-8 Press FUNC and release. While holding PIANO, press FUNC again. G-600 Power on while holding WRITE. G-800 Power on while holding WRITE. GC-8 No ROM reset. GI-10 Power on while holding PARAMETER + and -, then press VALUE +. GM-70 Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT. Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA TRANSFER. GP-8 No ROM reset. GP-16 Power on while holding the #6, #7, and #8 buttons.
Use the FUNCTION LEFT ( RIGHT (>) buttons to select “2.All Factory Preset,” then press WRITE three times. GP-100 Power on while pressing in the PARAMETER knob, then press WRITE. GR-09 Power on while holding Pedal #2, then press the VALUE + button. Now press EDIT/PLAY. GR-1 Power on while holding WRITE/COPY, then press YES. GR-30 Power on while holding Pedal #2, then press the PATCH+ button to select INI. Press EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously. All Other GR No ROM reset. GS-6 No ROM reset. GT-5 Power on while holding MOD and FEEDBACKER/SLOW GEAR. Press WRITE. GX-700 Press TUNER/UTILITY. Use PARAMETER LEFT ( ) buttons to select FACT INIT.
Cursor to left and dial SYSTEM, then right and dial P#100. Press WRITE, then TUNER/UTILITY. HP-100 No ROM reset. HP-130 Power on while holding REC. HP-300 No ROM reset. HP-400 No ROM reset. All Other HP The unit resets each time you turn it on. HS-Series No ROM reset. JD-800 Press DATA TRANSFER. Use PAGE UP (^) and DOWN (v) to select FACTORY PRESET. Press YES. JD-990 While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES). JP-6 No ROM reset. JP-8 No ROM reset. JP-8000 While holding SHIFT, press INIT/UTIL. Press INIT/UTIL repeatedly to select INITIALIZE WRITE. Use the DOWN/UP buttons to select FACTORY PRESET, then press WRITE.
JS-30 Power on while holding RECORD located in the SEQUENCER section. JUNO-6 No ROM reset. © 1998 Roland Corporation U.S. Re-initialization Procedures Faxback # 90006 Page 3 of 8