NQPSMTR Supplemental Notes MT-80s The unit resets each time you turn it on. MT-100 While holding STOP, press DELETE. After the display flashes ALL CLEAR, press EXECUTE. MT-120/s Power on while holding REPEAT, SONG (blue button), and PLAY. Press FWD repeatedly, until the window reads T-13. Press PLAY, then press REC. Power off, then on. MT-200 Power on while holding REPEAT, SONG (blue button), and PLAY. Use the DIAL to select T-15 in the window. Press PLAY, then press REC. Power off, then on. MV-30 No ROM reset. P-55 Power on while holding both INSTRUMENT buttons, then press PARAM 1. P-330 No ROM reset. PAD-8 Power on while holding MIDI CH and NOTE NUMBER. Power off, then back on.
PAD-80 Power on while holding both VALUE (solid ) buttons. PC-150 Power on while holding COMMAND on the left edge of the keyboard. PC-200 Power on while holding the two buttons under the word STANDARD. PC-200mkII Power on while holding the two buttons under the word STANDARD. PK-5 Power on while holding OCT/PARAM . PM-16 Power on while holding NUMBER buttons 1 and 2. (This reloads the first BANK of settings). PMA-5 Press UTILITY, then press the RIGHT (>) cursor button repeatedly to select INITIALIZE. Press ENTER, then [EXEC]. PR-100 The unit resets each time you turn it on. PRO-E Power on while holding WRITE. R-5 Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice.
R-8 Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice. R-8MKII Power on while holding CURSOR PAGE and PARAM SELECT, then press ENTER twice. R-8M Power on while holding ENTER and the RIGHT (>) CURSOR button, then press ENTER twice. R-70 Power on while holding MIDI and ASSIGN, then press YES twice. R-880 No ROM reset. RA-30 The unit resets each time you turn it on. RA-50 Power on while holding WRITE. RA-90 Power on while holding WRITE. RA-95 Power on while holding REC. RA-800 (WARNING: This will erase the original factory Performance settings. However, you can save them to disk before doing this procedure.) Power on while holding WRITE.
RD-500 Power on while holding NUMBER 1 and 8. Press DEC/YES. RD-600 Press EDIT. Press the RIGHT PAGE button until “Initialize: All” is displayed. Press INC/YES twice. Press EDIT to return to Play mode. All Other RD No ROM reset. RSP-550 Power on while holding PROGRAM/PAGE UP (^) and DOWN (v), then press WRITE. RSS-10 Power on while holding LOCK and OPTION. (The MCR-8 LED lights.) Press DEMO PROGRAM four times. Press DEVICE ID. © 1998 Roland Corporation U.S. Re-initialization Procedures Faxback # 90006 Page 6 of 8