NQPSMTR Supplemental Notes RSS-8048 No ROM reset. RV-70 Power on while holding WRITE and DOWN. Use the UP (^) and DOWN (v) buttons to select AL. Press WRITE. Power off, then back on. SB-55 Power on while holding CLEAR. SBX-1000 No ROM reset. S-Series No ROM reset. SC-7 The unit resets each time you turn it on. SC-33 Power on while holding REVERB and SPLIT, then press YES. SC-50 Power on while holding both INSTRUMENT buttons, then press ALL. SC-55 Power on while holding both INSTRUMENT buttons, then press ALL. SC-55mkII Power on while holding both INSTRUMENT buttons, then press ALL. SC-88 While holding SELECT, press both INSTRUMENT buttons. Press ALL.
SC-155 Power on while holding both INSTRUMENT buttons, then press ALL. SC-880 Press UTILITY. CURSOR UP and use the VALUE DIAL to select Factory Preset. CURSOR DOWN and use the VALUE DIAL to select ALL. Press ENTER twice. SCC-700C No ROM reset. SD-35 Power on while holding CLEAR, then press REC. SDD-320 No ROM reset. SDE-330 Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY. All Other SDE No ROM reset. SDX-330 Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY. SE-50 Power on while holding PARAM UP (^) and VALUE UP (^). Press WRITE. Wait three seconds and press WRITE again.
SE-70 Power on while holding in the NUMBER/VALUE knob. Press PARAMETER LEFT ( then dial to STANDARD mode or GUITAR mode. Press WRITE. SH-Series No ROM reset. SN-700 No ROM reset. SP-202 CAUTION: This procedure will erase all of the internal samples and initialize the unit: Hold down CANCEL and press DEL, then press the A/B button. Press DEL. SP-700 No ROM reset. SPD-8 Power on while holding EDIT, then press COPY. Use the VALUE UP (^) and DOWN (v) to select F A L in the window. Press ALL/ENTER. SPD-11 Power on while holding ALL/ENTER and the DOWN ARROW button. Press ALL/ENTER. SPD-20 Power on while holding ALL/ENTER and the DOWN ARROW button. Press ALL/ENTER. SRC-2 No ROM reset.
SRV-330 Power on while holding SYSTEM and PROGRAM. Use the DATA dial to select SYSTEM + PROGRAM. Press MEMORY. SRV-1000 No ROM reset. © 1998 Roland Corporation U.S. Re-initialization Procedures Faxback # 90006 Page 7 of 8