Scanning > Scanning Using the Scanner's Control Panel > Scanning to a Network Folder 3. Select the computer to which you want to save the scanned images. 4. Select the scanning side from 1-Sided or 2-Sided . 5. Select , check the Scanner Settings , and then change them if necessary. You can change the settings such as Slow or DFDS Function . 6. Tap x . Epson ScanSmart automatically starts on your computer, and scanning starts. See the Related Information below if you want to send the scanned invoice or receipt to your accounting service.
Related Information & “Application for Scanning from a Computer (Epson ScanSmart)” on page 25 & “Sending Invoice or Receipt Data to an Accounting Service” on page 131 Scanning to a Network Folder You can save the scanned image to a specified folder on a network. You can specify the folder by entering a folder path directly, but it may be easier if you register the folder information in the contacts list first. Before scanning, you need to set a network folder or FTP server. Note: ❏ Make sure the scanner’s Date/Time and Time Difference settings are correct. Select Settings > Basic Settings > Date/ Time Settings on the control panel. ❏ You can check destination before scanning.
Select Settings > Scanner Settings , and then enable the Confirm Recipient . 1. Place the originals. 2. Select Network Folder/FTP on the home screen of the scanner’s control panel. 105