Scanning > Scanning Using the Scanner's Control Panel > Scanning to a Memory Device Remove Shadow: Remove the shadows of the original that appear in the scanned image. ❏ Surround: Remove the shadows at the edge of the original. Correct Document Skew: Correct skew in the scanned image. This feature may not be able to correct documents that have been over skewed. Skip Blank Pages: Skip blank pages when scanning if there are any in the originals. If the result is not what you expected, adjust detection level. Note: ❏ Some pages may be incorrectly skipped as blank pages. ❏ This feature is not available when scanning double-sided originals that are stitched. Automatic Feeding Mode:
Set Automatic Feeding Mode. This feature allows you to scan originals automatically when they are loaded in the ADF. This feature is useful when scanning different sizes or types of originals one by one. Adjust the edge guides of the scanner before placing each original. Detect Double Feed: ❏ Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. Display a warning when multiple originals are fed at the same time. ❏ Length: Detect a double feed by the length. When the length of the second original scanned is different from the first, this is identified as a double feed. Clear All Settings Resets the scan settings to their defaults.
Scanning to a Memory Device You can save the scanned image to an external USB device. 1. Place the originals. 2. Insert a memory device into the scanner's external interface USB port. 3. Select Memory Device on the home screen of the scanner’s control panel. 117