Menu Options for Settings > Scanner Settings Direct power on Turn on the scanner directly when the scanner is connected to the power source, without pressing the power button. Scanner Settings Slow Slows down the feeding speed whenever scanning. When set to On , the icon changes to . Enable this in the following situations: ❏ When originals jam frequently ❏ When loading thin originals ❏ When scanning different types or sizes of originals at once ❏ If you feel that the scanner is noisy Double Feed Stop Timing Set the operation when any double feed is detect. ❏ Immediate: Stops feeding immediately after any double feed is detected. ❏ After Eject:
Originals detected as double feed are scanned as is, and the subsequent feed of originals is temporarily stopped. If the scanned image has no problem, you can resume scanning as is. DFDS Function Skips double feed detection once and continues scanning. When set to On , the icon changes to . Enable this to scan originals that are detected as double feeds, for example plastic cards or envelopes. Paper Protection Reduces damage to the originals by stopping scanning immediately when the following status is detected. ❏ A feeding error for the originals occurs ❏ Originals are fed askew Select the detection level to enable this feature. See the table below for details on each level.
139 Level Description On-Low Lower the sensitivity to detect the skew of the originals. On-Medium Detect the skew of the stapled originals and the skew that On-Low could not detect. On-High Increase the sensitivity to detect the skew of the originals.