Administrator Information > Monitoring a Remote Scanner > Checking Information for a Remote Scanner 2. Select Disable on the functions you want to set. Select Enable when you want to cancel controlling. PC Connection via USB You can restrict the usage of the USB connection from the computer. If you want to restrict it, select Disable . 3. Click OK . 4. Check that the disabled port cannot be used. PC Connection via USB If the driver was installed on the computer Connect the scanner to the computer using a USB cable, and then confirm that the scanner does not scan. If the driver was not installed on the computer Windows:
Open the device manager and keep it, connect the scanner to the computer using a USB cable, and then confirm that the device manager's display contents stays unchanged. Mac OS: Connect the scanner to the computer using a USB cable, and then confirm that you cannot add the scanner from Printers & Scanners . Related Information & “Running Web Config on a Web Browser” on page 26 Monitoring a Remote Scanner Checking Information for a Remote Scanner You can check the following information of the operating scanner from Status by using Web Config. ❏ Product Status Check the status, cloud service, product number, MAC address, etc.
❏ Network Status Check the information of the network connection status, IP address, DNS server, etc. ❏ Usage Status Check the first day of scanning, scanning count, etc. ❏ Hardware Status Check the status of each function of the scanner. ❏ Panel Snapshot Displays a snapshot of the screen displayed on the scanner's control panel. 205