Administrator Information > Advanced Security Settings > Connecting the Scanner to an IEEE802.1X Network Configuring a Certificate for IEEE802.1X Configure the Client Certificate for IEEE802.1X. When you set it, you can use EAP-TLS and PEAP-TLS as an authentication method of IEEE802.1x. If you want to configure the certification authority certificate, go to CA Certificate . 1. Access Web Config and then select the Network Security tab > IEEE802.1X > Client Certificate . 2. Enter a certificate in the Client Certificate . If you have already imported a certificate published by a Certification Authority, you can copy the certificate and use it in IEEE802.1X.
To copy, select the certificate from Copy From , and then click Copy . Related Information & “Running Web Config on a Web Browser” on page 26 231 Items Settings and Explanation EAP Type Select an option for an authentication method between the scanner and a RADIUS server. EAP-TLS You need to obtain and import a CA-signed certifci ate. PEAP-TLS PEAP/MSCHAPv2 You need to configure a password. EAP-TTLS User ID Confgi ure an ID to use for an authentication of a RADIUS server. Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. Password Confgi ure a password to authenticate the scanner. Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters.
If you are using a Windows server as a RADIUS server, you can enter up to 127 characters. Confrim Password Enter the password you configured for confrimation. Server ID You can confgi ure a server ID to authenticate with a specifei d RADIUS server. Authenticator verifei s whether a server ID is contained in the subject/subjectAltName fei ld of a server certifci ate that is sent from a RADIUS server or not. Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters. Certifci ate Validation You can set certifci ate validation regardless of the authentication method. Import the certifci ate in CA Certificate.
Anonymous Name If you select PEAP-TLS or PEAP/MSCHAPv2 for EAP Type, you can confgi ure an anonymous name instead of a user ID for a phase 1 of a PEAP authentication. Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters. Encryption Strength You can select one of the followings. High AES256/3DES Middle AES256/3DES/AES128/RC4