Scanner Basics > Information on Applications > Application for Configuring Scanner Operations (Web Config) Starting on Windows ❏ Windows 10 ❏ Windows 8.1/Windows 8 Click the start button, and then select Epson Software > EPSON Software Updater . Enter the application name in the search charm, and then select the displayed icon. ❏ Windows 7 Click the start button, and then select All Programs > Epson Software > EPSON Software Updater . Starting on Mac OS Select Go > Applications > Epson Software > EPSON Software Updater .
Application for Configuring Scanner Operations (Web Config) Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or smart device. You can confirm the scanner status or change the network service and scanner settings. To use the Web Config, connect the scanner and the computer or device to the same network. The following browsers are supported. Microsoft Edge, Internet Explorer 8 or later, Firefox * , Chrome * , Safari * * Use the latest version. Running Web Config on a Web Browser 1. Check the scanner's IP address.
Select Settings > Network Settings > Network Status on the scanner's control panel, and then select the active connection method status ( Wi-Fi Status or Wi-Fi Direct Status ) to confirm the scanner's IP address. 2. Launch a Web browser from a computer or smart device, and then enter the scanner's IP address. Format: IPv4: http://the scanner's IP address/ IPv6: http://[the scanner's IP address]/ Examples: IPv4: http://192.168.100.201/ IPv6: http://[2001:db8::1000:1]/ Note: ❏ Since the scanner uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser when you start Web Config; this does not indicate a problem and can be safely ignored.
❏ If the administrator password has not been set when accessing Web Config, you need to set a user name and password. c Important: Do not forget the user name and the password. If you forget them, you will need to contact Epson service support. 26