Specifications and Placing of Originals > Specifications of Originals > General Specifications for Origin … Note: When placing long receipts, refer to the section "Placing Long Paper". Related Information & “Placing Long Paper” on page 44 Specifications of Long Paper The specification of long paper you can load into the scanner. Note: ❏ Long paper means originals with a length of 393.8 mm (15.5 in.) or more. ❏ When scanning long paper, scanning speed is reduced. Maximum Length for Long Paper The following shows the maximum length according to the scanning resolution and the scanning method.
34 Size Resolution Loading Capacity Up to 215.9×393.8 mm (8.5×15.5 in.) 301 dpi or more Thickness of the originals stack: under 12 mm (0.47 in.) The loading capacity varies depending on the receipt. Up to 79×660 mm (3.14×26 in.) at a width of 79 mm (3.14 in.) or less 300 dpi or less Up to 215.9×914.4 mm (8.5×36 in.) at a width of 80 mm (3.15 in.) or more Size Thickness Paper Type Loading Capacity Maximum width: 215.9 mm (8.5 in.) Maximum length:
6,096.0 mm (240.0 in.)* 50 to 130 g/m2 Plain paper Fine paper Recycled paper 1 sheet Scanning Method Scanning Resolution Maximum Length ❏ Scanning from a computer ❏ Scanning from the scanner's control panel using the Computer feature 50 to 200 dpi 6,096.0 mm (240.0 in.) 201 to 300 dpi 5,461.0 mm (215.0 in.) 301 to 600 dpi 1,346.0 mm (53.0 in.) Scanning from the scanner's control panel using the following features: ❏ Network Folder/FTP ❏ Email ❏ Cloud ❏ Memory Device 200 dpi 914.4 mm (36.0 in.) 300 dpi 600 dpi Long paper is not supported Scanning from the scanner's control panel using the WSD feature 100 dpi 300 dpi Long paper is not supported