Preparing to Scan over a Network > Making Contacts Available > Registering Destinations as a Group Usi … Registering Destinations as a Group Using Web Config If the destination type is set to Email , you can register the destinations as a group. 1. Access Web Config and select the Scan tab > Contacts . 2. Select the number that you want to register, and then click Edit . 3. Select a group from Type . 4. Click Select for Contact(s) for Group . The available destinations are displayed. 5. Select the destination that you want to register to the group, and then click Select . 6. Enter a Name and Index Word . 7. Select whether or not you assign the registered group to the frequently used group.
Note: Destinations can be registered to multiple groups. 8. Click Apply . Related Information & “Running Web Config on a Web Browser” on page 26 90 Items Settings and Explanation SharePoint(WebDAV) Secure Connection Select HTTP or HTTPS according to the flie transfer protocol the server supports. Select HTTPS to allow the scanner to communicate with security measures. Save to Enter the server name between 1 and 253 characters in ASCII (0x20-0x7E), omitting "http://" or "https://". User Name Enter a user name to access a server in 30 characters or less in Unicode (UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not specify this, leave it blank.
Password Enter a password to access to a server within 20 characters or less in Unicode (UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not specify this, leave it blank. Certifci ate Validation The server's certificate is validated when this is enabled. This is available when HTTPS is selected for Secure Connection. To set up, you need to import the CA Certifci ate to the scanner. Proxy Server Select whether or not to use a proxy server.