Supermicro SBI-7127RG-E — Memory

SBI-7127RG-E Blade Server Module User’s Manual See the Supermicro website and the SuperBlade Network Modules User’s Manual for more details on these add-on cards. 1-3 Blade Module Features Table 1-1 lists the main features of the SBI-7127RG-E blade server module. See the proceeding section for components typically included in a blade system and other optional components. Specific details on the SBI-7127RG-E blade server module is found in Chapter 4: " Blade Module Features" on page 4-1 . Table 1-1. SBI-7427RG Blade Specification Features Processors The SBI-7127RG-E blade server module supports up to dual Intel Xeon E5-2600 V2 series 2011-pin (LGA 2011 Socket R) processors.

Refer to the Supermicro web site for a complete listing of supported processors ( http:// www.supermicro.com/products/superblade ). Please note that you will need to check the detailed specifications of a particular blade module for a list of the CPUs it supports. Details on installation of the processor into the SBI-7127RG-E blade server module are found in Chapter 3: "Setup and Installation" on page 3-1 . Memory The SBI-7127RG-E blade server module has eight (8) 240-pin DIMM sockets that can support up to 256 GB of DDR3 1866/1600/1333/1066 MHz speed SDRAM. Both interleaved and non-interleaved memory are supported, so you may populate any number of DIMM slots.

Please refer to the Supermicro web site for a list of supported memory ( www.supermicro.com/products/superblade ). The detailed specifications for a blade module will contain a link to a list of recommended memory sizes and manufacturers. 1-2 Mainboard B9DRG-E (proprietary form factor) Chassis Dimensions (HxWxD): 11.32” x 1.67” x 18.9” Processors Single or dual Intel™ Xeon®E5-2600 V2 series 2011-pin (LGA 2011 Socket R) processors. Please refer to our web site for a complete listing of supported processors.

FSB Speed QPI up to 8.0 GT/s bus speed Chipset Intel C602 Graphics Controller Matrox G200eW graphic controller BIOS 128 MB SPI Flash EEPROM with AMI® BIOS Memory Capacity Supports up to 256 GB of RDIMM and 64 GB of UDIMM DDR3 1866/1600/ 1333/1066 MHz speed SDRAM in eight (8) 240-pin DIMM sockets Expansion Slots Two (2) PCI-E 3.0 x16 expansion slots