Supermicro SBI-7127RG-E — 1-2 Product Checklist of Typical Components

Chapter 1 Introduction 1-1 Overview The SBI-7127RG-E blade server module is a compact self-contained server that connects into a pre-cabled enclosure that provides power, cooling, management and networking functions. One enclosure for the SBI-7127RG-E blade server module can hold ten blade units. In this manual, “blade system” refers to the entire system (including the enclosure and blades units), “blade” or “blade unit” refers to a single blade module and “blade enclosure” is the chassis that the blades, power supplies and modules are housed in.

Please refer to our web site for information on operating systems that have been certified for use with the SuperBlade ( www.supermicro.com/products/superblade/ ). Note: For your system to work properly, please follow the links below to download all necessary drivers/utilities and the user’s manual for your server. Supermicro product manuals: http://www.supermicro.com/support/manuals/ Product drivers and utilities: ftp://ftp.supermicro.com Product safety information: http://super-dev/about/policies/safety_information.cfm If you have any questions, please contact our support team at: support@supermicor.com Note:

A complete list of safety warnings is provided on the Supermicro web site at http://www.supermicro.com/about/policies/safety_information.cfm . 1-2 Product Checklist of Typical Components Your blade module ships with its mainboard already installed in its chassis. Memory, hard disk drives/SATA DOM drives, Graphic Processor Units (GPU) and the Central Processor Units (CPU) must all be installed by the user after shipment. See Chapter 3: "Setup and Installation" on page 3-1 for details on installation of these components. Aside from the blade module unit itself, the following optional Mezzanine add-on cards (with Infiniband Switch) may be ordered for your blade module:

AOC-XEH-iN2 AOC-IBH-XDD AOC-IBH-XQD AOC-IBH-XQS AOC-IBH-XDS AOC-IBH-X3QS AOC-IBH-X3QD 1-1