Supermicro SBI-7127RG-E — 3-6 Hard Drive Installation

SBI-7127RG-E Blade Server Module User’s Manual Figure 3-14. Installing a DIMM into a Memory Slot To Install: Insert module vertically and press down until it snaps into place. Pay attention to the bottom notch. Notch To Remove: Use your thumbs to gently push each release tab outward to free the DIMM from the slot. Side View Note: The notch should align with the receptive key point on the slot. Release Tabs Top View 4. Gently press down on the DIMM until it snaps into place in the slot. Repeat for all modules. 5. Replace the air shroud and the blade cover and install the blade module back into the enclosure. 6. Power up the blade unit (see "Powering Up a Blade Unit" on page 3-1 ).

3-6 Hard Drive Installation The SBI-7127RG-E blade module does not mount a hard disk drive system. However you may install an optional SATA DOM module for file or operating system storage, install an HDD or SSD drive or use the USB port for a USB drive. See "Hard Disk Drives" on page 4-8 for more details. 3-12