Supermicro SBI-7127RG-E — DIMM Installation

Chapter 3: Setup and Installation Figure 3-13. 8-Slot DIMM Numbering P1-DIMMC1 P1-DIMMD1 P1-DIMMB1 P1-DIMMA1 P2-DIMMG1 P2-DIMMH1 P2-DIMMF1 P2-DIMME1 CPU1 CPU2 Note: Though multiple DIMM memory module types and speeds may be supported, you need to use DIMM memory modules of the same speed and type. DIMM Installation Warning: Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. Installing DIMM Memory Modules 1. Power down the blade module (see "Powering Down a Blade Unit" on page 3-1 ). 2. Remove the blade from the enclosure and the cover from the blade (see "Removing/Replacing the Blade Cover" on page 3-2 ). 3.

Insert each DIMM vertically into its slot, starting with slots 1A and 2A. Pay attention to the notch along the bottom of the module to prevent inserting the DIMM incorrectly (see Figure 3-14 ). 3-11