Supermicro SBI-7127RG-E — Table 5-6. SATA Configuration Sub-menu

Chapter 5: BIOS Table 5-5. Chipset Configuration Sub-menu (Continued) Table 5-6. SATA Configuration Sub-menu 5-9 Menu Option Description Rank Interleaving This setting allows you to select different rank interleaving settings. Options include Auto, 1 Way, 2 Way, 4 Way and 8 Way. Patrol Scrub This setting allows you to either Enable or Disable Patrol Scrub for your system. Demand Scrub This setting allows you to Enable or Disable the Demand Scrubbing in your system. Data Scrambling This setting allows you to Enable or Disable the Data Scrambling in your system. Device Tagging This setting allows you to Enable or Disable the Device Tagging in your system.

Thermal Throttling For this setting, selecting Disabled sets Open Loop Thermal Throttling, whereas selecting CLTT sets Closed Loop Thermal Throttling. South Bridge Configuration This sub-menu static displays PCH Information (chipset Name, Stepping and USB Devices), and allows you to configure other South Bridge features. All USB Devices This setting allows you to enable USB devices in your system. Options include Enabled or Disabled. EHCI Controller 1/ EHCI Controller 2 This setting allows you to Enable or Disabled USB 2.0 (EHCI) support for Controller 1/2. Legacy USB Support This setting allows you to enable the use of Legacy USB devices.

If this option is set to Auto, legacy USB support will be automatically enabled if a legacy USB device is installed on the mainboard, and disabled if no USB devices are connected. The options include Disabled, Enabled and Auto. Port 60/64 Emulation This setting Enables or Disables I/O port 60h/64h emulation support. This should be enabled for the complete USB keyboard legacy support for non-USB aware OSes. EHCI Hand-off This setting is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by the EHCI driver. Options include Enabled or Disabled.

Menu Option Description SATA Configuration This submenu contains settings for SATA configuration options as well as information at the top on what hard disk drives are installed on the system. SATA Mode This setting allows you to specify the SATA mode used for your system. Options include Disabled, IDE Mode, AHCI Mode and RAID Mode. Aggressive Link Power Management This setting allows you to Enable or Disable Aggressive Link Power Management for your system. Port 0~5 Hog Plug These settings allow you to Enable or Disable SATA Port Hot Plug support for each port specified. Staggered Spin-up (5) These settings allow you to Enable or Disable AHCI Staggered Spin-up support for each drive.